V1.0.1 2024/4/17
R1: Support VBS series PLC
R2: VS1 support XY 128 points increased to 192 points, EC card which can reach 3

V0.84.13 2024/1/18
Q: Back up the VS1 project and connect the VS2 PLC. After the backup, the PLC Type of the file is wrong.
Q: VSENET2 Configuration, check the same IP Port

V0.84.10 2023/11/30
Q1: VS3, D2580, read from PLC, nickname is wrong

V0.84.9 2023/11/10
Q1: SFC, RST S, missing component

V0.84.8 2023/10/26
Q1: When clicking on the connection Type setting, the OK button will not be enabled.
Q2: If paste the SFC ladder, it will crash.

V0.84.7 2023/8/30
Q1: When reading the PLC project, it will crash due to incorrect component information
Q2: Ladder Form, Shift Mark, copy, will crash

V0.84.5 2023/8/22
Q1: Construct Ladder with Real Compare Contact, wrong
Q2: There is no SRET error in the ladder, and the Cursor should stop behind the STL form.

V0.84.4 2023/7/10
Q1: Ladder, monitor, C200Z0, wrong value
Q2: COM Port Setup, Modbus Mapping Form, VSM will crash

V0.84.3 2023/6/19
Q1: Entry Applied Function, reference, click on the blank of the Instruction Type, wrong.

V0.84.2 2023/6/6

V0.84.1 2023/5/23
Q1: Print Ladder, wrong row height

V0.84.0 2023/5/16
R1: Support $+, $MOV two Instructions
R2: Compare Ladder

V0.83.0 2023/3/2
R1: Open VB/VH file, convert some Instructions, special M and special D
R2: Ladder, mouse wheel + Shift = scroll horizontally
R3: Component Entry, if the component name is readonly, it will turn gray
R4: Component Entry, in the component number field, only the component number can be input; in the component nickname field, only the component nickname can be input
R5: Component information, display VZ, special M and special D items
R6: Resource usage status, display VZ items
Q7: The search form crashes
Q8: When monitoring, open the PLC information, press close, it will crash
Q9: In PLC copy mode, it will crash
Q10: Monitoring, PLC power off, missing error message
Q11: monitoring page, click on the head of the column, add D0-49, it will crash

V0.82.2 2022/10/3
Q1: Large files, the Cross reference is very slow to open

V0.82.1 2022/9/8
Q1: Search form crashes

V0.82.0 2022/9/5
Q1: monitoring, Ladder, index VZ, VZ negative, display value error
Q2: After Running Edit, the ladder form was closed

V0.81.2 2022/7/20
Q1: BMOV S,D,n; n is not added to the Resource using
Q2: EC3D10, Cross reference, wrong order

V0.81.1 2022/6/20
Q1: LINK, MBUS Table Wrong

V0.81.0 2022/5/13
R1: HoldArea Form can open VB file

V0.80.5 2022/3/22
Q1: With the same program unit number, when read from PLC, the program block will disappear 

V0.80.3	2022/3/9
V0.80.2 2022/2/17
Q1: Maximize the form, monitor, click another ladder form, there is no monitoring value in the output area

V0.80.1 2022/1/26
R1: MBUS table, the station number is limited to 247, changed to 255 

V0.80.0 2022/1/13
Q1: Ladder, delete 11 cells, leaving a blank row, rebuild the ladder after parsing, the next row will go up, and then undo, the deleted data will overwrite the data in the upper row
Q2: INT D700 D1400, when the ladder is monitoring, the value is wrong; D1400 is 16-bit, not 32-bit
Q3: Disable the network card, there is no available network card, open the connection Type setup, it will crash
Q4: VS3, ladder, input Mov D0 U10G1, there should be no error message 

V0.79.5 2021/12/6
Q1: Connection setup, choose USB, choose COM10, the connection fails, or the last time COM1
Q2: Monitor pages, paste Dec32, but change Dec
Q3: Monitor pages, View Nickname, the monitoring component X40-47 is added, and there is an error message
Q4: Monitor Component, during monitoring, an ON pulse is generated, which is changed from 10ms to 200ms 

V0.79.4	2021/11/5
Q1: Adobe Acrobat Reader DC, 64-bit, cannot be opened by pressing Help

V0.79.3 2021/10/29
Q1: monitor components, D9070 is added, and it is not preset to 32-bit

V0.79.2 2021/9/14
Q1: Ladder, Ctrl-Home, row height are wrong 

V0.79.1 2021/9/6
Q1: EC Card Replace form, component information is missing when undo
R2: Monitor pages form, special D, when adding a range, actively divide 16-bit, 32-bit
R3: Monitor Component form, multi-selection added

V0.79.0 2021/8/27
R1: COM Port Setup, CP2's Baud Rate add 1.5Mbps option
R2: Connection Setup, Ethernet adds myLink Server option
R3: Add EC Card Replace form, and modify the multiple components replace form

V0.78.4 2021/7/19
R1: Support VS3 partial Instructions

V0.78.2 2021/7/13
Q1: Cross reference, Add Z0 K14 Z0, no Z0 driven

V0.78.1 2021/6/2
Q1: Component information, Save As CSV, Win7 and WinXP cannot be saved as UTF8

V0.78.0 2021/5/31
R1: Component information, a. CSV can be imported, and the separator of the archive CSV is changed to a comma; b. Copy and paste with component number in the row;

V0.77.0 2021/4/26
Q01: Press F1, no opening Help
Q02: Prog1 STL, no RET, Prog2 general ladder diagram, after compiling, the result is wrong

V0.76.1 2021/3/18
Q1: 2 LadderMasterS, LadderMasterS A, click [File].[Backup], click [This Project], it will jump to LadderMasterS B
Q2: Compare Contact, Real2 components cannot be compared with 32-bit components

V0.76.0 2021/1/29
R1: VSENET2 Configuration